Zoeller 295-0070 Explosion Proof High Head Sewage Pump with Float Switch

Description

Zoeller DX295 Explosion Proof Sewage Pump
This Waste-Mate series submersible pump is designed for use in residential or commercial wastewater applications in Class I, Division 1, Group C and D locations. Each pump is FM/CSA approved and features innovative motor and electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosures become ignited, the enclosures are engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions. As with every Zoeller pump, each one is 100% factory tested to ensure quality and reliability for years of trouble-free performance.
WARNING: Not for use in acidic, methanol, or ethyl acetate atmospheres.
Features
Corrosion-resistant, powder coated epoxy finish
Durable cast iron cover, motor adapter and pump housing
Stainless steel bolts, handle, guard and float rod guide, switch arm and actuator assembly
Stainless steel screws and handle
Includes a stainless steel lifting bracket for easy installation and removal
FM listed motor for Class I, Division 1, Group C & D environments
Motor - 60 Hz, 3450 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected
Moisture sensors prewired in motor housing (functionality requires indicator circuit in panel)
Non-clogging bronze vortex impeller design
Upper ball bearing and lower ball bearing running in bath of oil
Neoprene square ring seals
20 ft. UL listed 5-wire neoprene cord
Sensor leads & power leads in one cord for easy installation
Maximum temperature for sewage or dewatering is 104°F
Passes 2" spherical solids
Major width: 13-5/16"
Height: 24-15/16"
On Point: 19-1/2"
Off Point: 9-3/4"
100% computerized texting and 100% tested submerged in water
This model is also available with 25, 35 and 50 ft cord lengths
Use (P/N l0-1031) seal failure panel to enable moisture sensor circuit
Specifications:
Brand: Zoeller
Mfg. Number: 295-0070
Series: X290
Model: DX295
Product Type: Explosion proof high head sewage pump
Application: Sewage/Dewatering
Operation: Automatic
Switch type: Mechanical float switch
Horsepower: 2 HP
Voltage: 230 Volts
Phase: 1
Frequency: 60 Hz
Speed: 3450 RPM
Pump Casing: Cast iron
Maximum Flow: 214 GPM
Maximum Total Head: 75 ft
Discharge Connection: 2" NPT vertical flange
Maximum Current: 17.1 Amps
Impeller Design: Non-clogging, vortex
Power Cord Length: 20 ft
Impeller Material: Bronze
Maximum Temperature (Continuos): 104°F
Overload Protection: Yes