Zoeller 282-0004 Waste-Mate 280 Series, Sewage Pump, 1/2 HP, 230 V , 1 Ph

Description

Zoeller "Waste-Mate" Sewage & Dewatering Pump
This submersible pump is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer effluent or unscreened raw sewage. The innovative vortex impeller design
reduces the risk of clogging and allows each pump to pass 2" spherical solids. This durable cast iron pump includes a powder coated epoxy finish to prevent corrosion an is designed to provide great heat dissipation from the
motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
Corrosion resistant powder coated epoxy finish
Durable cast iron constructed switch case, motor and pump housing and base
Cast iron non-clogging vortex impeller
No sheet metal parts to rust or corrode
Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
Shaft seal - Carbon and ceramic rotary face seal, with stainless steel wetted parts
Upper sleeve bearing and lower ball bearing running in bath of oil
Oil-filled, hermetically sealed, automatic reset thermal overload protected motor
2" flanged vertical discharge
Passes up to 2" spherical solids
Maximum temperature for sewage or dewatering 130° F
15 ft, UL listed, 3-wire neoprene cord and plug
Hermetically sealed to be watertight and dust-tight
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
Control Panel Options
Below are the control panels that can be used with this pump:
10-0125
10-1023
10-1036
10-0092
10-0093
10-1043
Note:
Image is illustrative and may not reflect details of actual product.
Specifications:
Brand: Zoeller
Mfg. Number: 282-0004
Model: E282
Series: Waste-Mate 280
Product Type: Sewage Pump
Application: Sewage/Dewatering
Operation: Manual
Horsepower: 1/2 HP
Voltage: 230 Volts
Phase: 1
Frequency: 60 Hz
Speed: 1750 RPM
Seal Type: Single
Pump Housing Material: Cast iron
Impeller Material: Cast iron
Impeller Type: Non-clogging vortex
Maximum Solids Handling: 2"
Discharge Connection: 2" flanged vertical
Maximum Flow: 125 GPM
Maximum Head: 25 ft
Cord Length: 15 ft
Maximum Fluid Temperature: 130°F