Zoeller 270-0004, Model E270, Waste-Mate 270 Series, Sewage Pump, 1 HP, 230 V

Description

Zoeller "Waste-Mate" E270 Sewage & Dewatering Pump
This submersible pump is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer groundwater, effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 2" spherical solids. This durable cast iron pump includes a powder coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
Corrosion-resistant powder coated epoxy finish
Durable cast iron motor housing, cap, and pump housing
Engineered plastic base
Engineered plastic non-clogging vortex impeller
Stainless steel screws, bolts, and handle
Motor - 1 HP, 60 Hz, 3450 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected
Neoprene square ring & gasket
Carbon and ceramic shaft seal
Upper sleeve bearing and lower ball bearing running in a bath of oil
2" NPT vertical discharge
Passes 2" spherical solids
Maximum operating temperature 130° F
20 ft. UL Listed 3-wire neoprene cord and plug
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
Control Panel Options
Below are the control panels that can be used with this pump:
10-0125
10-1023
10-1037
10-0092
10-0093
10-1044
Note:
Image is illustrative and may not reflect details of actual product.
Specifications:
Brand: Zoeller
Mfg. Number: 270-0004
Model: E270
Series: Waste-Mate 270
Product Type: Sewage/Effluent pump
Application: Sewage/Effluent/Dewatering
Operation: Manual
Horsepower: 1 HP
Voltage: 230 Volts
Phase: 1
Frequency: 60 Hz
Speed: 3450 RPM
Seal Type: Single
Pump Housing Material: Cast iron
Impeller Material: Engineered plastic
Impeller Type: Non-clogging vortex
Maximum Solids Handling: 2"
Discharge Connection: 2" NPT vertical
Maximum Flow: 132 GPM
Maximum Head: 28 ft
Cord Length: 20 ft
Maximum Fluid Temperature: 130°F