Zoeller 161-0106 Explosion Proof High Head Effluent Pump with Float Switch

Description

Zoeller MX161 High Head Explosion Proof Pump
This submersible pump is designed for use in residential or commercial dewatering and effluent applications in Class I, Division 1, Group C and D environments. Each pump is FM/CSA approved and features innovative motor and electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosures become ignited, the enclosures are engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions. As with every Zoeller pump, each one is 100% factory tested to ensure quality and reliability for years of trouble-free performance!
This pump is NOT for use in acidic, methanol, or ethyl acetate atmospheres.
Features
FM listed motor for Class I, Division 1, Group C & D environments
Automatic unit, Patent No. 8,535,014
Non-clogging vortex impeller design, bronze class 88-8-0-4
Stainless steel rotor shaft
Durable, cast construction: cast iron cover, motor adapter and pump housing. All cast iron class 30, 30000# tensile strength
25 ft, UL listed, 5-wire. Sensor leads and power leads in one cord for easy installation
Stainless steel plate, bolts, handle, guard and float rod, guide, switch arm and actuator assembly
Brass float and float rod
Threaded conduit connection for protecting cords in extra heavy-duty applications
Moisture sensors pre-wired in motor housing (functionality requires indicator in panel)
Simplex seal-fail panel (P/N 10-1031) available for automatic units
Motor: 3450 RPM, oil-filled, hermetically-sealed, automatic reset thermal overload protected
Maximum temperature for effluent or dewatering: 104° F (40° C)
Shaft seal: stainless steel wetted parts, carbon and ceramic rotary face seal
Upper ball bearing and lower ball bearing running in bath of oil
Neoprene square ring seals
Passes 3/4" (19 mm) spherical solids
Major width: 13-5/16" (33.8 cm)
Major height: 24-15/16" (63.3 cm)
On point: 19-1/2" (49.5 cm)
Off point: 9-3/4" (24.8 cm)
1-1/2" NPT discharge
100% computerized testing and 100% tested submerged in water
Corrosion-resistant, powder coated epoxy finish with stainless steel screws and handle
Specifications:
Brand: Zoeller
Mfg. Number: 161-0106
Series: X160
Model: MX161
Product Type: Explosion proof high head effluent pump
Application: Effluent/Dewatering
Operation: Automatic
Switch type: Mechanical float switch
Horsepower: 1/2 HP
Voltage: 115 Volts
Phase: 1
Frequency: 60 Hz
Speed: 3450 RPM
Pump Casing: Cast iron
Maximum Flow: 100 GPM
Maximum Total Head: 56 ft
Discharge Connection: 1-1/2" NPT vertical flange
Maximum Current: 15.5 Amps
Impeller Design: Non-clogging
Power Cord Length: 25 ft
Impeller Material: Bronze
Maximum Temperature (Continuos): 104°F
Overload Protection: Yes