STRAIGHT TUBE HEATER Commercial - Infrared - Natural Gas - 30 Ft - 100,000 BTU

Description

start_elivehelp_btncode
end_elivehelp_btncode
*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.
ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*
________________________________________________________________________________________________________________
Model:
VIR103196N
Condition:
New
Description:
Straight Tube Infrared Heater - Industrial/Commercial
Features:
100,000 BTU - Natural Gas Fired - 30 Ft Long - Infrared - Aluminized Steel Combustion Chamber - Direct or Indirect Vented Operation - CSA Certified, UL Listed - Made in the USA
Payment Options:
We Accept all Major Credit Cards, Personal & Business Checks, Bank Wire Transfers and Financing through
Shipping:
We Ship Worldwide via Air, Ocean and Common Carrier.  Contact us for a Freight Quote
Toll Free
______________________________________________________________________________________________________
SEE OUR FULL LINE OF
NATURAL GAS HEATERS
BY FOLLOWING THIS LINK:
OUR NATURAL GAS HEATER LINE
This series of commercial/industrial tube type infrared heaters is available in 25,000 BTU to 175,000 BTU configurations.  Available in both Natural Gas and LP Propane setups.  Length ranges from 9 Ft to 50 Ft
Questions?  Give our Customer Service Department a Call
Toll Free at
Description & Specifications:
Industrial/Commercial Natural Gas Fired Straight Tube Heater - 100,000 BTU - 30 Ft Long
Our USA made infrared straight tube heaters provide efficient uniform radiant energy distribution.  Straight tube heaters are recommended complete building heating in most commercial and industrial applications
Aluminized steel combustion chamber makes these heaters ideal for corrosive environments
Heater Type: Infrared - Straight Tube - Commercial/Industrial
Fuel Requirement: Natural Gas (NG)
BTU Rating: 100,000
Current Rating: 120V, 60 Hz, 1 Phase, 2.6 Amp
Length of Heater: 30 Ft
Combustion Chamber: 4" OD heat treated aluminized steel
Venting: Direct or indirect venting.  75 Ft sidewall venting and 50 Ft outside air combustion capability
Ignition: Direct spark
Safety Controls: 100% gas shut off safety control
Clearance to Combustibles - Sides: 28"
Clearance to Combustibles - Ceiling: 6"
Clearance to Combustibles - Below: 76"
Clearance to Combustibles - Ends: 15"
Mounting: Horizontal or angle mounting up to 45º
Gas Pipe Connection: 1/2" MPT male
Tube Diameter: 4"
Flue Connection: 4" Round
Fresh Air Connection: 6" Round
Fuse Rating: In-line, 2 Amp 250V for 24V circuit
Includes 36" stainless steel flexible gas connector
Optional thermostats available - see Optional Items below
Certifications & Approvals: CSA Design Certified - UL Listed - ANSI Z83.20 Compliant
Optional Item:
Model VIR109165
- Line Pressure Regulator - Heavy duty, corrosion-resistant construction.  Equipped with vent-limiting device.  Does not require venting
-
Please inquire: Toll Free
Optional Item:
Model VIR109168
- 4" Sidewall or Roof Venting Cap - Can be used in sidewall or through-the-roof venting systems -
Please inquire: Toll Free
Optional Item:
Model VIR109169
- 4" Combustion Air Cap - Used for combustion air or freish air duct termination.  Aluminum construction.  Fits Type B or single wall flue pipe -
Please inquire: Toll Free
Optional Item:
Model VIR108118
- 120/240V - Programmable Digital Line Voltage Thermostat
- Features separate programs for weekdays and weekends with up to 4 settings per day.  This is a hardwire thermostat -
Please inquire: Toll Free
Optional Item:
Model VIR28795
- 4" Vertical Venting Kit - for direct venting of combustion by-products.  Includes three 24" pipe lengths, one 12" "L" pipe length, increaser, roof flashing, storm collar, roof cap, 90º elbow and draft hood connector.  Additional lengths of pipe available -
Please inquire: Toll Free
Optional Item:
Model VIR29794
- 4" Horizontal Venting Kit - for direct venting of combustion by-products.  Includes three 24" pipe lengths, one 12" straight pipe, one appliance adapter, one horiztonal termination cap, one wall thimble, two 45º elbows and draft hood connector.  Additional lengths of pipe available -
Please inquire: Toll Free
Overall Length: 30 Ft (360")
Please allow 2 weeks for delivery - this heater is built to order
Weight: 155 Lbs
1 Year Warranty (Includes Parts & Labor)
Made in the U.S.A.
*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.
ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.