Skinner Normally Closed Solenoid Valves 24VDC 130 PSI 1/8 NPT 0.8 Watt C2F1310

Description

4396bSG1D.66
New Skinner (Acquired by Parker Hannifin) C Series Direct Acting Solenoid Valves, NC / Normally Closed Operation, 24V DC / 24VDC Coil Voltage, 130 PSI, 1/8" NPT Ports, 0.8 Watts, MADE IN USA, Part Number C2F1310.  Each bid quantity is for One (1) Valve.  You may bid / buy any number, up to the total quantity available above.
These were purchased at an industrial sale earlier this year, and they were new in the original factory trays.  We will packaged them in heavy Ziplok bags for resale.  Operation is Normally Closed.  That is to say, nothing flows through the valve until 24VDC current is applied to the lead wires.  The actuator coil inside the housing is one piece molded plastic construction (waterproof).  As such, they are suitable for indoor or outdoor use.  Compatible with Lubricated Air, Non-Lubricated Air, Inert Gases, Water, Hydraulic Fluids, Petroleum Products, Freons, and additional fluids compatible with materials of construction (see below).
New / old stock, with an occasional surface blemish from storage.
According to the calipers
:
Overall Height:  2.290" / 58.16 MM
Actuator Housing Diameter:  1.637" / 41.56 MM
Body Diameter:  1.183" / 30.06 MM
Ports:  1/8" NPT
Mounting Holes:  (2) #10-32, Spaced .937" (15/16") 23.81 MM OC (On Centers)
Length of Leads:  23 Inches
According to the manufacturer
:
SKINNER C-Series
General Purpose Two-Way Direct Acting Valves
DIRECT ACTING BRASS VALVES – NORMALLY CLOSED, NBR SEALS
SPECIFICATIONS
Standard Materials of Construction
Body – Brass
Seals – NBR
Sleeve – 304 Stainless Steel
Plunger – 430FR Stainless Steel
Stop – 430 FR Stainless Steel
Springs – Stainless Steel (18-8)
Orifice – Brass
Compatible Fluids
Lubricated Air, Non-Lubricated Air, Inert Gases, Water, *Steam, Hydraulic Fluids, Petroleum Products, Freons, and additional fluids compatible with materials of construction.
*Note: Use with Steam may require plunger seal material modification. Consult Skinner Valve to specify a suitable material.
Minimum Operating Pressure Differential
0 PSI
Pipe Sizes
1/8” NPT dry seal.
Electrical Characteristics
Voltage - DC – 24V Power Consumption - 0.8 watts
Agency Approvals
UL and CSA approvals are generally available on valves with applicable coil/enclosure combinations. For details consult Skinner Valve.
Miscellaneous
Vacuum: Down to 5 microns (0.005 torr, 2x10-4 in Hg)
Operating Speed: Up to 600 cycles per minute
Response Time: Approximately 10-15 milliseconds to open, 6-12 milliseconds to close.
Ports - 1/8" NPT (dry seal threads)
Orifice Diameter - 7/64"
CV Factor - 0.25