PES 108 Pipe Repair Kit 4" x 30' = Stop It Pipe Repair System

Description

www.pes-solutions.com
PES 108 PIPE REPAIR KIT
§
Water activated pipe repair
tape
§
250
°
F temperature
resistance
§
Rapid curing full cured in 30
minutes
Surface Preparation -
Hand tools such as wire brush, coarse sandpaper & metal file
ALL PRESSURE MUST BE REMOVED FROM THE PIPE PRIOR TO ANY WORK BEING CARRIED OUT.
1.
All oil and grease must be removed from the surface using an appropriate cleaner such as
MEK.
2.
All surfaces must be cleaned using wire brush, metal file, coarse sandpaper
etc.
3.
Once abraded, the surface must be degreased and cleaned using MEK or similar type
material.
Cure Times
At 68F° (20°C) the product will have the following cure times
Usable Life
3mins
Full cure
30mins
Where the maximum over-coating time is exceeded, the material should be abraded to remove surface contamination.
Mixing and Application
STEP 1
Ensure you have 1 x foil Wrapped 108 pipe repair tape, 1 x tub of water, 1 x pair of gloves
STEP 2
Take the bandage out of the Foil wrap
STEP 3
Place the bandage in a tub of clean water and squeeze
2 or 3 times and for around 5 seconds
STEP 4
Wrap the tape around the damaged pipe surface. Wrap the tape as tightly as possible. Keep the bandage wet.
STEP 5
Once the resin starts to foam Wet your hands and massage the surface of the bandage Until you have a fully cured White resin mix on the surface Of the pipe.