Manual Sewage Pump, 10' cord, 3/4 HP, 2" Discharge, 115V

Description

Overview:
The Liberty Pump LE71M2
is a manual submersible sewage pump with 3/4HP, 115V motor and a 10' quick-disconnect power cord. The Liberty LE71M2 is intended to be run using an approved liquid level control or approved motor control with a correct rating that matches motor input in full load amperes. Be sure that when the Liberty sewage pump shuts off, at least 6" of fluid is left in the basin so the impeller remains submerged. Separate approved pump control device or panel is required for automatic operation.
The Liberty Pump LE71M2 manual submersible sewage pump features rugged 2-vane, semi-open impellers that allow handling of 2" solids. This Liberty sewage pump also has a 2" FNPT flanged discharge and a shut-off head of 28'. The heavy-duty built Liberty Pumps LE71M2 sewage pumps are ideal for residential and light commercial sewage applications.
Features:
Rugged 2 vane, semi-open cast iron impellers
Cast iron housings and volute with all stainless and brass fasteners
416 stainless steel rotor shaft
Oil-filled, hermetically sealed motors
Built-in thermal protection on single phase models
Permanently lubricated upper and lower ball bearings
Unitized shaft seals
Single float mechanical level control with series plug for manual bypass operation-standard on single-phase automatic models
Adjustable pumping range
Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor
Technical Specifications:
Horsepower: 3/4HP
Cord length: 10'
Discharge: 2" FNPT Flanged
Solids Handling: up to 2"
Shut-off Head: 28'
Voltage: 115V
Amps: 12
Hertz: 60 Hz
Phase: 1
RPM: 1725
Maximum fluid temperature: 140°F
Height: 14.1"
Width: 12.25"
Weight: 60 lbs.
Minimum basin diameter: 18"
Minimum basin depth: 24"