Industrial Strength Permanent Bond Multi Purpose Epoxy Adhesive 2101, 2.5 grams

Description

Technical Product Bulletin
GENERAL PURPOSE EPOXY ADHESIVE
PRODUCT DESCRIPTION:
AA-BOND 2101
is a clear medium viscosity epoxy formulation recommended for laminating, bonding, repair and other adhesive applications where the combination of superior structural, mechanical and electrical performance properties are required.
AA-BOND 2101
easily mixes and cures at room temperature, and develops strong, durable, tough bonds to most clean, dry material surfaces.
The fully cured
AA-BOND 2101
bonds are great electrical insulators which also provide excellent resistance to weather, galvanic action, many mild acids and alkalis, salt solution, petroleum solvents, lubricating oil, gasoline, jet fuels, alcohol, and many other organic and
inorganic materials.
GENERAL PROPERTIES:
Appearance
Slight haze/Clear
Cure Type
Room temperature or Heat cure
Benefits
·
Resistant to many organic/inorganics
·
Strong bong strength
·
Durable
Mix Ratio by weight
100:25 / Resin : Hardener
Substrates
Metals, ceramics, glass, glass fabrics, wood leather and rigid plastics
UNCURED PROPERTIES:
Viscosity @ 25 °C
18500 cPs ±1000
Solids Content
100%
Specific Gravity, mixed
1.19 g/cc
Pot Life
30 minutes
Shelf life
1 Year
CURE SCHEDULE:
4 hours
@ 65°C
24 hours
@ 25°C
ELECTRICAL PROPERTIES:
CTE, linear
30.6
µin/in-°F
@Temperature 68.0 °F
Glass Transition Temp, Tg
62.0 °C, 144 °F
Operating Temperature
-60 to 135 °C
MISC PROPERTIES:
Glass Transition Temp, Tg
62°C, 144 °F
Hardness, Shore D
84
Adhesive Bond Strength
3300 psi (Alum to Alum)
Izod Impact, Notched
0.800 ft-lb/in
ELECTRICAL PROPERTIES:
Volume Resistivity
6.00e+15 ohm-cm
5.00e+9
ohm-cm
@Temperature 212 °F
,
100 °
Dielectric Constant
4.3
@Frequency 1000 Hz
Dielectric Strength
370 kV/in
Dissipation Factor
0.020
@Frequency 1000 H
GENERAL INFORMATION:
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1)
Carefully clean and dry all surfaces to be bonded.
2)
Apply AA-BOND 2101 mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3)
Some separation of components is comm0on during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
4)
Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
AVAILABILITY:
This epoxy can be supplied in various different packages.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application