Goulds WS3034D3 Model 3888D3, WS_D3 Series, Sewage Pump, 3 HP, 460 V, 3 Ph

Description

Goulds 3888D3 Submersible Sewage Pump
This pump is designed for use on guide rail systems and base elbow disconnect systems fitted with vertical 125# ANSI flanges for horizontal discharge. It is capable of handling sewage containing non-abrasive 2-1/2 inch maximum solids.
Features
Cast iron, two vane semi-iron, non-clog impeller with pump-out vanes for mechanical seal protection
Heavy duty cast iron, volute type casing for maximum efficiency
Volute type casing with 3", 125#, ANSI flanged, horizontal discharge. Compatible with A10-30 cast iron or A10-30B cast iron and brass (non-sparking) guide rail assembly
Dual mechanical seal: silicon carbide vs. silicon carbide outer seal and ceramic vs. carbon inner seal, stainless steel metal parts, BUNA-N elastomers
300 series stainless steel shaft with keyed design
300 series stainless steel fasteners
Capable of running dry temporarily without damage to seals or motor
Motor is rated for continuous duty when fully submerged
O-ring assures positive sealing against contaminants and oil leakage
Class 10 overload protection must be provided in control panel which is sold separately
Applications
Used in a variety of residential, commercial and industrial applications such as:
Sewage systems
Flood and pollution control
Dewatering/effluent
Farms
Hospitals
Trailer courts
Motels
Specifications:
Brand: Goulds
Model Number: 3888D3
Mfg. Number: WS3034D3
Series: WS D3
Product Type: Sewage pump
Application: Effluent/Sewage/Wastewater
Operation: Manual
Horsepower: 3 HP
Voltage: 460 Volts
Phase: 3
Frequency: 60 Hz
Pump Casing: Cast iron
Speed: 1750 RPM
Impeller Diameter: 7.25"
Discharge Size: 3" 125# ANSI flange, 4 bolt horizontal
Impeller Type: Two vane, semi-open; non-clog
Power Cord Length: 20 ft
Thermal Protection: Control panel required
Maximum Solids Handling: 2-1/2"
Flow at 20 ft: 350 GPM
Flow at 25 ft: 310 GPM
Maximum Flow: 400 GPM
Flow at 30 ft: 265 GPM
Maximum Head: 53 ft
Flow at 35 ft: 210 GPM
Flow at 40 ft: 160 GPM
Flow at 45 ft: 100 GPM
Locked Rotor Current: 24.8 Amps
Maximum Working Pressure: 30 PSI
Maximum Submergence: 50 ft
Maximum Current: 6.0 Amps
KVA Code: H
Full Load Motor Efficiency: 83%
Resistance Start / Line-Line: NA / 7.5
Maximum Temperature (Continuos): 104°F
Maximum Temperature (Intermittent): 140°F