-40%
Goulds WS2018D3 Sewage Pump, Model 3888D3, WS_D3 Series, 2 HP, 208 V, 1 Ph
$ 1793.66
- Description
- Size Guide
Description
Goulds 3888D3 Submersible Sewage PumpThis pump is designed for use on guide rail systems and base elbow disconnect systems fitted with vertical 125# ANSI flanges for horizontal discharge. It is capable of handling sewage containing non-abrasive 2-1/2 inch maximum solids.
Features
Cast iron, two vane semi-iron, non-clog impeller with pump-out vanes for mechanical seal protection
Heavy duty cast iron, volute type casing for maximum efficiency
Volute type casing with 3", 125#, ANSI flanged, horizontal discharge. Compatible with A10-30 cast iron or A10-30B cast iron and brass (non-sparking) guide rail assembly
Dual mechanical seal: silicon carbide vs. silicon carbide outer seal and ceramic vs. carbon inner seal, stainless steel metal parts, BUNA-N elastomers
300 series stainless steel shaft with keyed design
300 series stainless steel fasteners
Capable of running dry temporarily without damage to seals or motor
Motor is rated for continuous duty when fully submerged
O-ring assures positive sealing against contaminants and oil leakage
Built-in thermal overloads with automatic reset
Built-in capacitors
Applications
Used in a variety of residential, commercial and industrial applications such as:
Sewage systems
Flood and pollution control
Dewatering/effluent
Farms
Hospitals
Trailer courts
Motels
Specifications:
Brand: Goulds
Model Number: 3888D3
Mfg. Number: WS2018D3
Series: WS D3
Product Type: Sewage pump
Application: Effluent/Sewage/Wastewater
Operation: Manual
Horsepower: 2 HP
Voltage: 208 Volts
Phase: 1
Frequency: 60 Hz
Pump Casing: Cast iron
Speed: 1750 RPM
Impeller Diameter: 7"
Discharge Size: 3" 125# ANSI flange, 4 bolt horizontal
Impeller Type: Two vane, semi-open; non-clog
Power Cord Length: 20 ft
Thermal Protection: Yes
Flow at 15 ft: 320 GPM
Maximum Solids Handling: 2-1/2"
Flow at 20 ft: 280 GPM
Flow at 25 ft: 235 GPM
Maximum Flow: 365 GPM
Flow at 30 ft: 185 GPM
Maximum Head: 45 ft
Flow at 35 ft: 130 GPM
Flow at 40 ft: 60 GPM
Locked Rotor Current: 50.8 Amps
Maximum Working Pressure: 30 PSI
Maximum Submergence: 50 ft
Maximum Current: 19.0 Amps
KVA Code: B
Full Load Motor Efficiency: 80%
Resistance Start / Line-Line: 1.1 / 0.9
Maximum Temperature (Continuos): 104°F
Maximum Temperature (Intermittent): 140°F