Goulds 2ED51E4BA, Submersible Effluent Pump, 1 HP, 460 V, 3 Ph, 20' Cord, Manual

Description

Goulds 2ED Series Submersible Effluent Pump Dual Seal with Sensor Probe
This is a submersible effluent pump designed for most effluent systems. This pump has a maximum spherical solids handling capability of up to 3/4 of an inch and is designed for continuous use.
Features
Dual mechanical seals
Lower: SILICON CARBIDE VS. SILICON CARBIDE sealing faces. Stainless steel metal parts, BUNA-N elastomers
Upper: CARBON VS. CERAMIC sealing faces. Stainless steel metal parts, BUNA-N elastomers
Seal sensor probe is located in oil-filled chamber. If pump should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires optional Seal Fail Circuit in the control panel
Corrosion resistant, stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation
300 series stainless steel fasteners
Fully submerged in high-grade turbine oil for lubrication and efficient heat transfer
Class F insulation motor
Pump ratings are within the motor manufacturers recommended working limits, can be operated continuously without damage when fully submerged
Upper and lower heavy duty ball bearing construction
Power and control cable are severe duty rated, oil and water resistant. 20 feet standard with optional lengths available
O-ring assures positive sealing against contaminants and oil leakage
Applications
Farms
Trailer courts
Effluent systems
Motels
Schools
Hospitals
Industry
Specifications:
Brand: Goulds
Mfg. Number: 2ED51E4BA
Series: 2ED
Product Type: Submersible effluent pump
Application: Effluent systems
Horsepower: 1 HP
Voltage: 460 volts
Phase: 3
Frequency: 60 Hz
Speed: 3450 RPM
Discharge Connection: 2" NPT
Maximum Capacity: 105 GPM
Maximum Head: 78 ft.
Max. Solid Size: 3/4"
Design: Submersible/Dual seal
Overload Protection: Must be provided in starter unit.
Impeller Diameter: 4.44"
Impeller Material: Cast Iron
Pump Casing Material: Cast Iron
Shaft Seal Lower: Silicon Carbide/BUNA/300 SS
Shaft Seal Upper: Carbon/Ceramic/BUNA/300 SS
Cord Length: 20 ft.
Max. Working Pressure: 55 PSI
Max. Temperature: 104°F
Code: B
Maximum Current: 3.5 Amps
Locked Rotor Current: 12.1 Amps
KVA Code: L
Full Load Motor Efficiency: 79%
Resistance Start: NA
Line-Line Resistance: 16.2 Ohms
Power Cable Size: 14/4
Minimum Submergence: 6" below top of motor
Maximum Submergence: 50 ft.