FlyBeeper mini BT variometer for paragliding with Bluetooth

Description

Variometer with Bluetooth and wireless buttons for paragliding.
Audible climb rate indication based on user-defined curves.
Specifications:
Sensitivity: ±20 cm;
Delay for the start of climb +2 m/s: < 0.5s, +20 cm/s: < 1s;
Delay for the end of climb +20 cm/s: < 1s;
Power: CR2032 lithium battery
Battery life: 120 hours from a single CR2032 (210 mAh).
4 buttons. Available as an HID wireless keyboard. Supports xcTrack, xcSoar, and others.
Volume adjustment: 3 levels + off
Auto power-off timer: 8 hours;
Silent mode on the ground (default off).
LED frequency based on climp speed (default off).
Bluetooth battery level indication;
Bluetooth Temperature. Reading and subscription to changes (every 5 seconds), accuracy 2 tenths of a degree Celsius
Bluetooth Pressure. Reading and subscription to changes (10 times per second), accuracy 1 tenth of a Pascal (averaged value - reading from the sensor 60 times per second)
Bluetooth Altitude above sea level. Reading and subscription to changes (once per second), accuracy 1 centimeter (calculated value for standard QNH = 1013.25 hPa)
Supported software: xcTrack, SeeYou Navigator, FlyMe, maps.flybeeper.com, and others.
OTA DFU - firmware update over the air.
Online configurator: no installation required.
Settings: frequency, duration, and duty cycle at 12 points, start of ascent and descent, border mode, buzzer volume, uart transmission protocol.
Simulation: change the frequency in the configurator and listen to your device in real-time mode.
Casing: industrial SLS 3D printing by nylon
Attachment: 12 mm Velcro strip through side eyelets to free ends or cockpit
Power supply 2÷3.6 V: holder for a standard 3 V CR2032 lithium battery;
Power consumption: 1.3 mA at 3V in active mode and 0.2 µA when off;
Dimensions: 34x28x10mm;
Weight: 9g with CR2032 battery.
Contents of delivery
:
Viriometer FlyBeeper mini BT, Battery CR2032, T-type velcro strip 150x12mm.