-40%

Dayton 4Le18 2 Hp 3" Submersible Sewage Pump 240V 3 PHASE NEW IN THE BOX

$ 475.2

Availability: 100 in stock
  • Restricted States: []
  • Power Source: N/A
  • Condition: New
  • Width: 14.200
  • All returns accepted: Returns Accepted
  • Length: 18.000
  • Phase: 3
  • Switch Type: None
  • HP: 2
  • Battery Included: No
  • Depth: 14.200
  • Height (In.): 21-1/4
  • Type: Sewage Ejector Pump
  • Voltage: 200 to 240 V
  • Agency Compliance: CSA
  • MPN: 4LE18
  • Return shipping will be paid by: Buyer
  • California Prop 65 Warning: Y
  • Motor RPM: 1750
  • Restocking Fee: No
  • Number of Batteries: N/A
  • RPM: 1750
  • Base Material: 303 Stainless Steel
  • Max. Temp. (F): 104
  • Housing Material: Cast Iron
  • Modified Item: No
  • Dia.: 16-23/32"
  • Item must be returned within: 30 Days
  • NumberOfItems: 1
  • Features: Sewage Ejector Pump
  • Diameter: 16-23/32"
  • Thermal Protection: No
  • Motor Type: 3-Phase
  • Height: 21-1/4"
  • Max. Temp.: 104 Degrees F
  • Country/Region of Manufacture: CN
  • Amps: 15.2, 13.2
  • Item: Sewage Ejector Pump
  • Brand: DAYTON
  • Cord Length: 25 ft.
  • Dia. (In.): 16-3/4
  • Battery Size: N/A
  • Bearing Type: Ball
  • Weight: 132
  • Style: Sewage Ejector Pump
  • Refund will be given as: Money Back
  • Custom Bundle: No
  • Color: N/A
  • Housing: Cast Iron

    Description

    THIS LISTING IS FOR A NEW IN THE BOX SEWAGE PUMP 4LE18
    2HP 3PHASE POWER
    200-230 VOLT
    DOES NOT COME WITH AUTOMATIC SWITCH
    These general purpose three-phase 200 to 480V sewage ejector pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They also use three-phase power that's more efficient than one-phase power. Pumps remove sewage containing solids from drains where a gravity system won't work, such as in septic systems that are below the main sewer line.
    Sewage ejector pumps remove sewage containing solids from drains where a gravity system won't work, such as in septic systems that are below the main sewer line. They have no screen on the bottom of the pump and a large outlet at the top to allow debris to flow through freely. These sewage pump systems mount in a basin where waste collects from a drain pipe and they're turned on and off by an attached switch or control panel. The wastewater is then pumped out of the basin and up to the main sewer or septic line.