-40%
BJM Mop-Up Water Pump R400D-115 2-inch Discharge Pumps Down to 1/12 of an Inch
$ 288.68
- Description
- Size Guide
Description
BJM Mop-Up Water Pump R400D-115 2-inch Discharge 50 GPMMopping up after flooding is made easy with the model R400D. The Mop-up pump features a unique non-return valve built in below the impeller. The rubber clad bottom helps protect against damage to floor surfaces. Pumping down to 1/12 of an inch and starts up in only a small puddle of liquid, and features a special diaphragm valve that prevents water backflow. Perfect for easy clean up of floods, and spills in basements, businesses, industrial and recreation areas.
BJM Pump Model No. R400D-115
Top Discharge: allows for superior cooling of motor and provides a slim line design.
Longer Power Cord: Standard 33ft. power cord on pumps ½ HP and below and 50ft. on pumps 1HP and above.
304SS Motor Housing: Superior abrasion resistance will not wear out like aluminum motor housings when pumping sandy water.
Three Seal Motor Protection: Motor is protected by double mechanical seals. Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic*. An additional lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber.
More Motor Protection: Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pumps with Class A and B insulation. Automatic switch turns pump motor off if temperature and/or amp draw raises too high. When the motor cools the switch will automatically reset and the pump will turn back on.
Tough Pump Construction: Hardened cast iron stands up to rough handling and pumping sandy water unlike pumps with soft resin impellers or plastic exterior components*.
GENERAL DATA
MAX. FLOW: GPM
50
MAX. HEAD: ft
36'
PUMP TYPE
Elec. Submersible, Top Discharge
STRAINER OPENING
N/A
DISCHARGE CONNECTION
2" NPT-M
SHIPPING WEIGHT:lbs
33
CONSTRUCTION/MATERIAL DATA
MECHANICAL SEAL - UPPER
Crb / Cer
MECHANICAL SEAL - LOWER
Sic / Sic
MOTOR CASING
304 SS
PUMP VOLUTE
Cast Iron
IMPELLER- MULTI VANE
FG Reinf. Plastic
STRAINER
None
LIPSEAL & O-RINGS
Buna-N
ROTOR SHAFT
304 SS
EXTERNAL HARDWARE
304 SS
QTY. OIL IN SEAL CHAMBER
1.35 U.S. fl. oz.
ELECTRICAL/MOTOR DATA
MOTOR RATING: HP
0.5
MOTOR RPM
3450
MOTOR INSULATION CLASS
F
MOTOR SERVICE FACTOR
1.1
VOLTAGE
115, 1PH-60Hz
CURRENT F.L.A.
6
MOTOR PROTECTION
Thermal Breaker
POWER CORD: GAGE; LENGTH
16/3; 33'
MAXIMUM LIQUID TEMPERATURE
104 F
View Our Complete Line of Water Pumps, Hose & Generators
Combined Shipping
We offer combined shipping on all our items. Shipping is combined based on the total weight of your order. To get combined shipping add all the items that you are interested in to your shopping cart and than click Request total from seller.
Very Important
:
Please DO NOT pay for your order until the invoice is combined. If you pay for each item individually the orders will ship individually and will not be eligible for combined shipping.
International Customers
:
Please be aware of what your customs fees will be for your country before ordering. These fees are your responsibility and will have to be paid before your order will be released to you.
First Class Mail International:
shipping is the least inexpensive international shipping available, but keep in mind that in most cases orders do arrive within 20 business days, but some countries can take up to 90 business days to arrive. First Class Mail International tracking is limited to some countries and will not show no more once the order leaves the USPS facility in Chicago.