AquaGuard WAGS7200-4W Water Safety Shut-Off Valve

Description

AquaGuard WAGS7200-4W Water Safety Shut-Off Valve
The WAGS7200-4W fits all electric, gas, and oil-fired water heaters, all tank capacities - not requiring gas shutoff. (Water Shutoff Only) WAGS® prevents disastrous floods and untold damage to your property, and avoids costly insurance claims. The WAGS® Valve is designed to shut off the water supply (plus gas supply for gas-fired heaters) in the event of a water leak from a hot water heater. WAGS® is the only 100% mechanical water heater safety valve on the market! The WAGS® Valve sits in a drip pan under the water heater and is activated when leaking water accumulates to a predetermined level in the pan. Once activated, the industrial-duty, spring loaded piston in the valve shuts off the water flow. “The One Shot Wonder”? The WAGS valve is a single-use, one-time activation water flow shutoff device for gas, oil, or electric water heaters. Like an automotive airbag, it performs a one-time critical function. How does the WAGS work? The WAGS valve is designed to shut off the water supply to a water heater in the event of a leak, minimizing property damage. The WAGS valve sits in a drip pan under the water heater and when approximately 1 inch of water accumulates, the WAGS closes off the incoming water. A red pop-up tab indicates activation. Another WAGS benefit is that the tank typically draws a vacuum and stops the water leak. Do WAGS Valves require checking or servicing? No… WAGS is the only 100% mechanical water heater safety valve on the market. No Electricity. No Batteries. No Maintenance. Is installation difficult and time consuming? Installation requires a drip pan positioned under the heater tank and routing of the cold water line in and out of the WAGS Valve. Professional installation normally adds 15-20 minutes to a new tank installation.   What’s in the box: WAGS valve Installation brochure Required product sticker for water heater tank Warranty card & return envelope Drip pan self-adhesive foam drain dam Condensation drain tube Ratings: Valve Rating: 20° F – 200° F Wire Assembly Rating: 5 – 35 Milli OHMS Maximum Operating Pressure: 80 psi System Rating: 40° F - 180° F Maximum Body Design Pressure: 125 psi Additional Materials Needed for Installation: Water heater drip pan Two 3/4˝-14 male threaded sweat adapters Two lengths of copper (or other approved) tubing
AquaGuard WAGS7200-4W Water Safety Shut-Off Valve
The WAGS7200-4W fits all electric, gas, and oil-fired water heaters, all tank capacities - not requiring gas shutoff. (Water Shutoff Only)
WAGS® prevents disastrous floods and untold damage to your property, and avoids costly insurance claims. The WAGS® Valve is designed to shut off the water supply
(plus gas supply for gas-fired heaters)
in the event of a water leak from a hot water heater.
WAGS® is the only 100% mechanical water heater safety valve on the market!
The WAGS® Valve sits in a drip pan under the water heater and is activated when leaking water accumulates to a predetermined level in the pan. Once activated, the industrial-duty, spring loaded piston in the valve shuts off the water flow.
“The One Shot Wonder”? The WAGS valve is a single-use, one-time activation water flow shutoff device for gas, oil, or electric water heaters. Like an automotive airbag, it performs a one-time critical function.
How does the WAGS work? The WAGS valve is designed to shut off the water supply to a water heater in the event of a leak, minimizing property damage. The WAGS valve sits in a drip pan under the water heater and when approximately 1 inch of water accumulates, the WAGS closes off the incoming water. A red pop-up tab indicates activation. Another WAGS benefit is that the tank typically draws a vacuum and stops the water leak.
Do WAGS Valves require checking or servicing? No… WAGS is the only 100% mechanical water heater safety valve on the market. No Electricity. No Batteries. No Maintenance.
Is installation difficult and time consuming? Installation requires a drip pan positioned under the heater tank and routing of the cold water line in and out of the WAGS Valve. Professional installation normally adds 15-20 minutes to a new tank installation.
What’s in the box:
WAGS valve
Installation brochure
Required product sticker for water heater tank
Warranty card & return envelope
Drip pan self-adhesive foam drain dam
Condensation drain tube
Ratings:
Valve Rating: 20° F – 200° F
Wire Assembly Rating: 5 – 35 Milli OHMS
Maximum Operating Pressure: 80 psi
System Rating: 40° F - 180° F
Maximum Body Design Pressure: 125 psi
Additional Materials Needed for Installation:
Water heater drip pan
Two 3/4˝-14 male threaded sweat adapters
Two lengths of copper (or other approved) tubing
×
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
ELP 100255-BN 5-Arm Halophane Glass Chandelier Brushed Nickel Trim
Blue Lightning 1017400 Flexible Magnesium Anode Rod - 42" Length
Blue Lightning 1017410 Flexible Magnesium Outlet Anode Rod - 42" Length
Blue Lightning 1017420 Flexible Magnesium Anode Rod 42" with Drain
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© SDSmarket.com
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by