-40%
4LE11 1/2 HP Submersible Effluent Pump 230V 2

4LE11 1/2 HP Submersible Effluent Pump 230V 2" NPT Discharge Cast Iron

$ 246.61

Availability: 100 in stock
  • GPM of Water @ 25 Ft. of Head: 65
  • Brand: DAYTON
  • Height: 17-5/16"
  • Item: Submersible Effluent Pump
  • Motor RPM: 3450
  • GPM of Water @ 5 Ft. of Head: 96
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Seller
  • Motor Type: Oil Filled PSC
  • HP: 1/2
  • GPM of Water @ 10 Ft. of Head: 92
  • Shaft Seal: Silicon Carbide
  • Cord Length: 20"
  • GPM of Water @ 30 Ft. of Head: 53
  • All returns accepted: Returns Accepted
  • GPM of Water @ 20 Ft. of Head: 76
  • Refund will be given as: Money back or replacement (buyer's choice)
  • MPN: 4LE11
  • Impeller Material: Polypropylene
  • Duty: Intermittent
  • Base Material: Cast Iron
  • Phase: 1
  • Top Material: Cast Iron
  • GPM of Water @ 15 Ft. of Head: 84
  • Condition: Open box. Packaging in distressed condition, pump unaffected.
  • Bearing Type: Ball
  • GPM of Water @ 40 Ft. of Head: 20
  • Housing Material: Cast Iron
  • Switch Type: None

    Description

    Submersible Effluent Pump
    SPECS
    Dayton submersible ejectors are self-contained and recommended for use in a sump or basin, where they should be vented in accordance with local plumbing codes. They are designed to pump effluent or wastewater, nonexplosive and noncorrosive liquids, and shall not be installed in locations classified as hazardous in accordance with the United Stated Electrical Code (NEC), ANSI/NFPA 70. Never install the pump in a trench, ditch, or hole with a dirt bottom; the legs will sink into the dirt and suction will become plugged.