110V 1/4 Inch Brass Electric Solenoid Valve Control Flow Normally Closed Durable

Description

The brass solenoid valve adopts high-temperature casting technology, which is reliable and wear-resistant and corrosion-resistant. It can automatically open or close the valve after receiving the electrical control signal to realize automatic adjustment or remote control of the temperature, flow, pressure and other parameters in the system. Widely used in drinking water, high-end water heaters, smart drinking fountains, water heaters, irrigation control (gardens, farms, etc.), liquid control (pipes, artificial rivers, etc.), air-conditioned rooms (experimental), factories, etc.)
SPECIFICATIONS：
Inducts
Your Best Online Business Partner
110V 1/4 Inch Brass Electric Solenoid Valve Control Flow Normally Closed Durable
The brass solenoid valve adopts high-temperature casting technology, which is reliable and wear-resistant and corrosion-resistant. It can automatically open or close the valve after receiving the electrical control signal to realize automatic adjustment or remote control of the temperature, flow, pressure and other parameters in the system. Widely used in drinking water, high-end water heaters, smart drinking fountains, water heaters, irrigation control (gardens, farms, etc.), liquid control (pipes, artificial rivers, etc.), air-conditioned rooms (experimental), factories, etc.)
SPECIFICATIONS：
Material: Brass
Size:1/4 inch
Orifice Diameter: 5/32"(4 mm)
Operation Mode:N/C
Suitable Media:water, air, natural gas, propane, butane, petroleum, mineral oil, diesel, low viscosity fluids, etc. (do not use with gasoline)
Flow Direction:One-way (follow the arrow on the valve body)
Power rating:24W
Voltage:AC 110-120V
Operating Pressure Differential:0- 145psi (0- 1mpa,gravity conveying capacity)
Current:0.2A
Medium Temperature:15-180°F(-10~80°C)
Operating Temperature:15-125℉(-10~50℃)
Precautions:
Special attention: before installation, the pipe must be cleaned and purged clean to avoid impurities blocking the valve port and damaging the sealing surface. If there are small impurities and dust in the valve, a filter must be installed before the valve (filter screen ≥80 mesh cm2).
When installing, pay attention to the arrow on the valve body should be consistent with the flow direction of the pipeline fluid, and the coil should be installed vertically and horizontally.
Before installation, check whether the pressure, temperature and voltage are consistent with the actual parameters of the nameplate of the solenoid valve.
Pay attention to the cleaning of the medium. The internal parts of the valve body should be cleaned regularly in use.
When installing, clamp the valve body with a wrench, and then screw the pipe, do not act on the coil force, so as not to make the solenoid valve internal bending deformation and loosening of the connection resulting in leakage.
Solenoid valve must be installed into the fluid several times, to ensure normal action, can be put into normal use.
solenoid valve before and after the pipeline to install pressure gauge, in order to observe the pipeline pressure.
The inlet pressure of the solenoid valve must be greater than the outlet pressure, otherwise the solenoid valve will appear normally open state.
Item Specifics
UPC
Does not apply
Brand
inducts
MPN
165275-inducts
Valve Operation
Solenoid
Suitable Media
water, air, natural gas, propane, butane,etc.
Custom Bundle
No
Operating Temperature
15-125℉(-10~50℃)
Modified Item
No
Medium Temperature
15-180°F(-10~80°C)
Current
0.2A
Country/Region of Manufacture
China
Voltage
AC 110-120V
Operating Pressure Differential
0- 145psi (0- 1mpa,gravity conveying capacity)
Power rating
24W
Flow Direction
One-way (follow the arrow on the valve body)
Operation Mode
N/C
Size
1/4 inch
Material
Brass
Payment
1.We accept PayPal only，payment system supports Mastercard, Visa, Discover, American Express and eCheck(Echeck via Paypal will be pending until it is cleared).
2. You should pay your order within 10 days of the success of a transaction. If you do not pay the order in the meantime, we will cancel the transaction and resell the product to other buyers. In addition, it will appear as an Unpaid case from eBay.
Shipping
1.We only ship to the 48 states excluding FPO or APO addresses.
2.Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product. It is beyond our ability to change the address after we ship your item.
Returns
We ONLY accept returns with original package and will require a picture of the damaged part for verification.. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Contact Us
we are always listening to the customers and colleagues to keep innovating our products and service. Please feel free to contact us if you have any idea or question regarding our products or service.
Inducts
Your Best Online Business Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Other
Hot Item
New List Item
Creality Upgraded Ender-5 Pro 3D Printer Resin Mainboard Size 220*220*300mm
USD 351.48
Handheld Jet Fan Leaf Blower 20V Lithium Battery Cordless Electric Vacuum
USD 80.56
Direct Shipping Labels ( 4"x6", 500 packs) for Postage Address Shipping,
USD 19.99
Label Printer, 4 x 6 inch Thermal Shipping Label Printer for Office Home Use
USD 89.59
2-Branch 1/2” PEX Set Stainless Steel Radiant Floor Heating Manifold
USD 95.90
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
110V 1/4 Inch Brass Electric Solenoid Valve Control Flow Normally Closed Durable
The brass solenoid valve adopts high-temperature casting technology, which is reliable and wear-resistant and corrosion-resistant. It can automatically open or close the valve after receiving the electrical control signal to realize automatic adjustment or remote control of the temperature, flow, pressure and other parameters in the system. Widely used in drinking water, high-end water heaters, smart drinking fountains, water heaters, irrigation control (gardens, farms, etc.), liquid control (pipes, artificial rivers, etc.), air-conditioned rooms (experimental), factories, etc.)
SPECIFICATIONS：
Material: Brass
Size:1/4 inch
Orifice Diameter: 5/32"(4 mm)
Operation Mode:N/C
Suitable Media:water, air, natural gas, propane, butane, petroleum, mineral oil, diesel, low viscosity fluids, etc. (do not use with gasoline)
Flow Direction:One-way (follow the arrow on the valve body)
Power rating:24W
Voltage:AC 110-120V
Operating Pressure Differential:0- 145psi (0- 1mpa,gravity conveying capacity)
Current:0.2A
Medium Temperature:15-180°F(-10~80°C)
Operating Temperature:15-125℉(-10~50℃)
Precautions:
Special attention: before installation, the pipe must be cleaned and purged clean to avoid impurities blocking the valve port and damaging the sealing surface. If there are small impurities and dust in the valve, a filter must be installed before the valve (filter screen ≥80 mesh cm2).
When installing, pay attention to the arrow on the valve body should be consistent with the flow direction of the pipeline fluid, and the coil should be installed vertically and horizontally.
Before installation, check whether the pressure, temperature and voltage are consistent with the actual parameters of the nameplate of the solenoid valve.
Pay attention to the cleaning of the medium. The internal parts of the valve body should be cleaned regularly in use.
When installing, clamp the valve body with a wrench, and then screw the pipe, do not act on the coil force, so as not to make the solenoid valve internal bending deformation and loosening of the connection resulting in leakage.
Solenoid valve must be installed into the fluid several times, to ensure normal action, can be put into normal use.
solenoid valve before and after the pipeline to install pressure gauge, in order to observe the pipeline pressure.
The inlet pressure of the solenoid valve must be greater than the outlet pressure, otherwise the solenoid valve will appear normally open state.
Item Specifics
Brand :
inducts
MPN :
165275-inducts
Valve Operation :
Solenoid
Suitable Media :
water, air, natural gas, propane, butane,etc.
Custom Bundle :
No
Operating Temperature :
15-125℉(-10~50℃)
Modified Item :
No
Medium Temperature :
15-180°F(-10~80°C)
Current :
0.2A
Country/Region of Manufacture :
China
Voltage :
AC 110-120V
Operating Pressure Differential :
0- 145psi (0- 1mpa,gravity conveying capacity)
Power rating :
24W
Flow Direction :
One-way (follow the arrow on the valve body)
Operation Mode :
N/C
Size :
1/4 inch
Material :
Brass
Payment
1.We accept PayPal only，payment system supports Mastercard, Visa, Discover, American Express and eCheck(Echeck via Paypal will be pending until it is cleared).
2. You should pay your order within 10 days of the success of a transaction. If you do not pay the order in the meantime, we will cancel the transaction and resell the product to other buyers. In addition, it will appear as an Unpaid case from eBay.
Shipping
1.We only ship to the 48 states excluding FPO or APO addresses.
2.Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product. It is beyond our ability to change the address after we ship your item.
Returns
We ONLY accept returns with original package and will require a picture of the damaged part for verification.. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Contact Us
we are always listening to the customers and colleagues to keep innovating our products and service. Please feel free to contact us if you have any idea or question regarding our products or service.
All rights reserved.