1/3 HP Cast Iron Submersible Sump Pump with Vertical Float Switch Top Suction

Description

1/3 HP Cast Iron Submersible Sump Pump with Vertical Float Switch Top Suction
Wayne's CDU790 features a durable cast iron base and epoxy-coated housing for long life and quiet operation. This submersible pump is designed for 11 in. or larger sump pits. The CDU series is one of the most popular replacement pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1-1/2 in. discharge allows easy installation plus maximum flow.
On 9 in. - off 4 in.
Fully submersible
1/3 HP; max. flow rate is 3800 GPH; 2700 GPH at 10 ft. of discharge lift
Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit
1-1/2 in. NPT discharge
For use in 11 in. Dia or larger sump basins; 9 in. on level and 4 in. off level
Submersible cast iron and coated steel sump pump with vertical float switch
Epoxy-coated steel motor housing and rugged, cast iron pump base
Assembled in the U.S.A.
Specifications
Housing Material - Cast-Iron
Pump Switch Type - Vertical
Discharge Flow @ 15 ft. (gallons/hour) - 1700
Voltage (volts) - 115
Self-Priming - Yes
Minimum working temperature (F) - 40
Amperage (amps) - 9.5
Discharge Flow @ 10 ft. (gallons/hour) - 2700
Discharge Flow @ 0 ft. (gallons/hour) - 3800
Power Type Required - AC
Impeller Material - reinforced poly carbonate
Horsepower (hp) - 1/3 hp
Maximum Working Temperature (F) - 120
Cord Length (ft.) - 8
Submersible - Yes
Battery Back-Up - No
Sump Pump Outlet Diameter Type - 1-1/2 FPT
Dimensions
Maximum Pumping Height (ft.)
21
Product Depth (in.)
10
Product Height (in.)
14
Product Width (in.)
10
Switch-Off Height (in.)
4"
Switch-On Height (in.)
9"